LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 501 (2.0L - Crankshaft & Cylinder Block - Engine Code(S): CAEB, CAED, CPMA & CPMB (Sedan)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Overview - Cylinder Block, Transmission Side >> Transmission Side Sealing Flange with Eight Bolts - Tightening Specifications and Sequence

Transmission Side Sealing Flange with Eight Bolts - Tightening Specifications and Sequence

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, and 2013 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Transmission Side Sealing Flange Tightening Sequence (Eight Bolts)
GWWA13-10509Courtesy of
TRANSMISSION SIDE SEALING FLANGE WITH EIGHT BOLTS - TIGHTENING SPECIFICATIONS AND SEQUENCE

Step Bolts Tightening Specifications
1. -1 to 8- Install by hand all the way
2. -1 to 8- 9 Nm
scientia non olet · About LEMON Manuals