Ribbed Belt, Removing and Installing, Vehicles with Hydraulic Power Steering: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, and 2013 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
There Is a Risk of Injury If the Radiator Fan Turns on by Itself.
- When performing procedures near the radiator maintain a distance to the radiator.
NOTE:
Risk of Destroying a Used Ribbed Belt by Reversing the Running Direction.
- Mark the running direction before removal.
- Pay attention to the running direction when reinstalling.
- Turn the tensioner in the direction of -arrow- to release the tension on the ribbed belt.
- Secure the tensioner with the -T40098-.
- Remove the ribbed belt.