Crankshaft - Tightening Specifications and Sequence
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, and 2013 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Replace the bolts that were tightened with an additional turn after removing them.
- Tighten the bolts in the steps shown in the sequence:
CRANKSHAFT - TIGHTENING SPECIFICATIONS AND SEQUENCE
| Step | Bolts | Tightening Specification/Additional Turn |
|---|---|---|
| 1. | -1 to 10- and -A arrows- | Install by hand all the way |
| 2. | -1 through 10- | 65 Nm |
| 3. | -1 through 10- | 90° additional turn |
| 4. | -A arrows- | 15 Nm |
| 5. | -A arrows- | 90° additional turn |