Balance Shaft, Removing And Installing, Exhaust Side: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, and 2013 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Remove the radiator. Refer to RADIATOR, REMOVING AND INSTALLING .
Remove the balance shaft drive chain. Refer to Balance Shaft Drive Chain, Removing and Installing .
Remove the bolt -1- on the exhaust camshaft balance shaft. - Insert the -T10394/1- from the -T10394-. - Insert

Courtesy of
Insert the -T10394/1- from the -T10394-.

Courtesy of
Insert the -T10394- and push the sliding sleeve in the direction of -arrow-.

Courtesy of
Install the -T10055- into the -T10394- and remove the balance shaft.

Courtesy of