Clutch Pedal, Removing And Installing: Removing
WARNING: This page is about a different car, the 2013 Audi S4, 2012 Audi S4, 2011 Audi S4, and 2010 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bracket. Refer to MOUNTING BRACKET, REMOVING AND INSTALLING .
-- Remove the over-center spring -item 2- ; refer to OVER-CENTER SPRING, REMOVING AND INSTALLING .
-- Remove the mounting pins -1-.
-- Lift the securing tab in direction of -arrow A-, turn the axle in direction of -arrow B- and remove the axle -2-.
-- Remove the bearing axle -2- and the clutch pedal -3-.