LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Maintenance Procedures - Cabriolet) >> 01 - Maintenance >> Vehicle checks within inspection and >> Vehicle checks within inspection and service framework

Vehicle checks within inspection and service framework

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

For vehicle checks, we recommend interactive acceptance VAS 5000 and performance test stand V.A.G 1858.

Brake check

Information for checking brakes on front and all wheel drive vehicles is in the corresponding brake system repair manual.

Performance check

Perform performance check on performance test stand recommended by Audi. The corresponding correction factors for automatic transmissions and all wheel drive are provided in these test stands. Vehicles with all wheel drive may only be tested on a four-wheel performance test stand. The four-wheel performance test stand V.A.G 1858 has movable rollers in order to be able to test vehicles with different axle spacing.

Tachometer check

With the tachometer test, the vehicle wheels are driven. Vehicles with all wheel drive may only be tested on a four-wheel test stand.

Shock absorber check

Information on testing shock absorbers can be found in the suspension repair manual.