Light bulb for light in door panel, removing and installing

WARNING: This page is about a different car, the 2002 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove door trim:

Refer to 70 - INTERIOR TRIM

Fig 1: Identifying Bulb For Socket At Door Trim And Connector For Socket

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove bulb -1- from socket at door trim.
Unplug connector -2- from socket.

Installing

Installation is reverse of removal, paying attention to the following:

Plug in connector.
Insert light bulb for light in door panel into opening and engage.