Tail light and bulb carrier, removing and installing: Removing
WARNING: This page is about a different car, the 2002 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Switch ignition off and remove ignition key.
- Turn light switch into -0- position.
- Turn concealment cap in luggage compartment carpet to the left -arrow- and remove.
- Remove bolt -1-.
- Slide tail light to the outside -arrows- and disengage retaining bolts from body.
- Unplug connector at bulb carrier.
- Turn bulb socket counter clockwise -arrow- and remove from housing.
- Twist bulb out of bulb socket.