Drivers power window switch panel - 2 switches, removing and installing

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove front door trim → 70 - INTERIOR TRIM .

Fig 1: Identifying Fasteners, Electrical Connection, And Window Switch

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Use small screwdriver to carefully release fasteners - arrows -.
Pull window switch downwards out of door trim.
Disconnect electrical connection - 2 - at window switch - 1 -.

Installing

Install in reverse order of removal, noting the following:

Press window switch into switch mounting until retaining hooks engage.
Install front door trim → 70 - INTERIOR TRIM .