Ambient Illumination Deactivation Switch E491 , removing and installing
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Where equipped, the Ambient Illumination Deactivation Switch E491 controls the "coming home " and "leaving home" lighting function.
Additional information Owners Manual
Removing
- Remove light switch → Light Switch E1 , removing and installing .
- Reach through opening for light switch and press the switch unit out of the switch housing in direction of - arrow -.
- Disconnect electrical connection.
Installing
Install in reverse order of removal, noting the following:
- Install light switch → Light Switch E1 , removing and installing .