Signal Horn/Dual Tone Horn H1 - through 10.04, removing and installing

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove applicable headlamp:

Halogen headlamp through 10.04 → Headlamps, removing and installing
HID headlamp through 10.04 → Headlamps, removing and installing
HID "Bi-Xenon" headlamp through 10.04 → Headlamps, removing and installing

Fig 1: Identifying Connector, Nut, And Horn

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disconnect electrical connection - 2 -.
Remove nut - 1 - and detach horn from retainer.

NOTE:

Illustration shows bumper removed for clarity.

Installing

Install in reverse order of removal, noting the following:

Install headlamp.

Halogen headlamp through 10.04 → Headlamps, removing and installing
HID headlamp through 10.04 → Headlamps, removing and installing
HID "Bi-Xenon" headlamp through 10.04 → Headlamps, removing and installing

Tightening torque

Component - fastener	Nm
Horn to bracket - nut	5