License plate lamp, removing and installing

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Turn light switch to position "0".

CAUTION:

Switch off all electrical consumers.
Switch ignition off and remove ignition key.

Fig 1: Identifying Bolt In Handle Recess

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove screw - arrow - in handle trim.
Lever bulb holder out of handle trim.
Remove bulb (12 V, 5 W) from bulb holder.

Installing

Install in reverse order of removal.