Satellite Radio R146 , Avant (from MY05), removing and installing
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
- If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault-Finding" routine.
Use the Vehicle Diagnosis, Testing and Information System VAS 5051 to do so.
- Turn off all electrical components.
- Remove ignition key.
Removing
- Open luggage compartment.
- Remove bracket - 3 - from base mount - 4 - far enough so connectors can be reached.
- Disconnect connectors on Satellite Radio R146 - 2 -.
- Remove bracket - 3 - completely from base mount - 4 -.
- Remove bolt - 1 - (3 Nm).
- Remove Satellite Radio R146 - 2 - from bracket - 3 -.
Installing
- Install in reverse order.
- Activate Satellite Radio R146.