LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (3.0L - Engine Mechanical, Engine Code(S): AVK, BGN) >> 13 Engine - Crankshaft, Cylinder block >> Sealing flanges and flywheel/drive plate, removing and installing >> Front sealing flange, removing and installing >> Tightening torques

Tightening torques

WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Component    Nm 
Front sealing flange to M6 10
Cylinder block M8 30 1)
Tensioning lever to front sealing flange 45 1)
Tensioning lever to front sealing flange 10
Toothed belt gear to crankshaft   200 + 180°1)2)
Locking bolt for adjustment hole to front sealing flange 10

1) Replace bolts.

2) 180°= one half-turn

scientia non olet · About LEMON Manuals