Needle bearing installation depth
WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- To measure installation depth, place a metal ruler onto plastic ring -1- of dual-mass flywheel.
- Measurement -x- = 0.5 mm.
NOTE:
Plastic ring is sensitive to hits. If the plastic ring is damaged, dual-mass flywheel must be replaced.