Drive shaft, tightening
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Use open-ended wrench to hold compressor drive shaft - A - in position and turn compressor drive unit - B - in direction of arrow - D - (tightening torque 60 Nm).
- After tightening compressor drive shaft, check installation position of socket - E -.