Seat heating element (sports seat), replacing

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Remove seat → Seat, assembly overview .
Remove backrest → Front seat backrest, assembly overview .

Fig 1: Seat Heating Element (Sports Seat) Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove cover and padding from seat pan → Seat pan cover and padding (sports seat), assembly overview .
Cut area - A - out of old heating element - 1 -.
Pull out cable - 2 -.
Cut off cables - 4 - (2x) at positions - B - (4x).

Align heating elements - 1 - on the seat cushion, remove the protective film and bond the heating elements firmly onto the padded surfaces.
Insert cable - 2 - into the intended gap - 3 -.
The connecting cables must be laid without crossing in the bottom of the gaps at positions - 4 -.