Steering wheel (standard steering wheel), assembly overview
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
1 - Torx bolts T30 (2x)
- Tightening torque 7 Nm
2 - Steering wheel
- Removing
- Remove airbag unit (standard steering wheel) → Airbag unit (standard steering wheel), assembly overview .
- Center steering wheel (wheels in straight-ahead position).
- Remove bolt - 7 -.
- Disconnect connector for coil - 3 -.
- Heated steering wheel: Disconnect connector for heated steering wheel - 8 -.
- Remove steering wheel - 2 -.
- Installing
- Installation is in reverse order of removal.
- Ensure that connector and catch engage fully (i.e. audibly).
- Attach steering wheel in center position (wheels in straight-ahead position).
- Replace bolt - 7 - and tighten to 50 Nm.
3 - Connector for coil
4 - Connector for airbag unit
5 - Airbag unit
6 - Horn connector
7 - Multi-point socket head bolt
- Tightening torque 50 Nm
8 - Connector for heated steering wheel
9 - Self-cancelling ring with slip ring