Gear cover and boot, assembly overview

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Gear Cover And Boot, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Automatic transmission cover

Removing

Pry off gear cover - 1 -.

2 - Manual transmission cover

Removing

Pry off gear cover - 2 -.

3 - Boot

Removing

Unclip mounting frame - 6 -.
Turn connecting piece - 5 - to right in direction of - arrow A - until it unlocks.
Remove selector lever knob - 4 -.

Installing

Install selector lever knob - 4 -.
Turn connecting piece - 5 - to left in direction of - arrow B - until it locks.
Clip in mounting frame - 6 - in direction of - arrow C - arrow C.

4 - Selector lever knob

5 - Connecting piece

6 - Mounting frame