Damping mechanism for glove compartment lid, removing and installing
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Front end hook 3370
Removing
- Open glove compartment.
- Remove right instrument panel cover - arrow - using front end hook 3370.
Fig 2: Disconnecting Electrical Connector, Removing Joint Pin 1 & Disengaging Brake For Glove Compartment Cover In A Clockwise
- Disconnect connector - 2 -.
- Remove joint pin - 1 -.
- Unlock glove compartment lid damping mechanism - 3 - in clockwise direction and remove.
NOTE:
- Shown in illustration with glove box removed.
- Installing
- Installation is in reverse order of removal.