Right instrument panel trim, removing and installing
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools, testers and auxiliary items required
- Special hook 3370
- Torque wrench V.A.G 1783
Removing
- Remove storage compartment on drivers side → Drivers side storage compartment (with and without knee bolster), removing and installing .
- Open glove compartment.
- Carefully remove trim - 1 - using hook for front end 3370.
- Pull off right instrument panel cover - arrow - using special hook 3370.
- Remove bolts - 1 -.
Tightening torque: 3 Nm
- Remove bolts - 1 - (3x).
Tightening torque: 3 Nm
- Remove right trim.
Installing
Installation is reverse of removal.