Passive Occupant Detection System (PODS), passenger airbag deactivation procedure after a crash (USA only)
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- A RE-ZERO must be performed on seat occupied recognition control module after each airbag or passenger belt tensioner deployment.
- If seat rails or seat pan are replaced after an accident due to deformation, seat occupied recognition must be replaced by service kit. Then basic setting and RE-ZERO must be carried on seat occupied recognition control module.