Rear wheel housing liner, removing and installing

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Wheel Housing Liner Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Rear wheel housing liner

Remove rear wheel before disassembly.
Remove wheelhousing liner downward.

2 - Screw

1.5 Nm

3 - Screw

Inserted only on the right side of vehicle.

4 - Spreader nut