LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Body Exterior - Cabriolet) >> 63 - Bumpers >> Rear bumper >> Bumper cover, removing and installing >> Side panel grommets, installing

Side panel grommets, installing

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking To See If Threaded Pins On Bumper Side Walls And Grommets In Fenders Are Present
GW00020667Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • Before installing bumper cover - 1  - , check to see if threaded pins - 2  - on bumper sides and grommets - 3  - are present.

4 - Side panel

5 - Nut (6 Nm)

scientia non olet · About LEMON Manuals