Radiator grille (from model year 2006) - assembly overview
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
1 - Bumper cover
2 - Radiator grille
- Bumper cover removed.
3 - Trim for radiator grille
4 - License plate holder
- Bumper cover not removed.
- To disassemble from rear side, unclip from radiator grille.
Removing radiator grille
- Bumper cover removed.
- Remove bolts - arrows - around edge and pull radiator grille from bumper cover.
Arrow - 1.5 Nm
Removing panel for fog lights
- Disengage locking mechanisms - arrows - and pull off panel toward vehicle interior.
Fog lights removed.
- Disengage locking mechanisms - arrows - and pull off panel toward outside.
Covers are divided into two parts.
Disengage locking mechanisms - arrows - and pull off cover toward outside.