Bumper crossmember, removing from cover

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Bumper cover removed.
Remove signal horn - 4 -.

Fig 1: Crossmember, removing from cover and installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disconnect hose - 5 - of headlamp cleaning system on both sides (press release buttons).
Unscrew bolts - 3 - of right spray jet for headlamp cleaning system - spray jet remains installed.
Remove bolts - 1 - (Qty. 5).
Pry off retaining clips - 2 - (Qty. 3).

Swivel spray jet for headlamp cleaning system to the side and remove crossmember from bumper cover.