Rear bracket/roof frame seal or center roof frame seal, removing and installing

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

To remove, open convertible top until center roof frame seal and rear roof frame seat do not touch at rear edges.

Fig 1: Removing Seal From Retaining Track

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove seal from retaining track in - direction of arrow -.

NOTE:

When installing, ensure seal is positioned exactly in sealing profile.
Center roof frame seal, rear roof frame seal and bracket seal are removed in the same way.