Hydraulic lines, removing and installing

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Securing Plate From The Groove

GW00020644

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove rear side trim →
- 70 - INTERIOR TRIM
- 70 - INTERIOR TRIM for BODY INTERIOR - CABRIOLET
.
Using pliers, remove securing plate - arrow - from the groove.
Remove hydraulic line from hydraulic cylinder.

NOTE:

Hydraulic line seal is pressed into hydraulic cylinder and cannot be replaced separately.