Lock cylinder cover cap, removing and installing
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- Remove lock cylinder - 4 - → Lock cylinder, removing and installing .
- Carefully loosen hooks from retainer and remove cover cap sideways toward rear from locking pins.
Installing
- Insert brace with square hole on pins on housing.
- Press cover cap onto housing until locking hooks engage.