Gas-filled strut, venting
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Clamp only within this area, otherwise accident could occur!
- Clamp gas-filled strut in vice area - x - = 50 mm (2 in.).
- Cover area of sawn portion with a rag to absorb oil spraying out.
CAUTION:
Always wear eye protection when performing this procedure.
- Cut through cylinder of gas strut within first third of cylinders overall length using piston rod end of cylinder as reference point.