LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Body Exterior - Cabriolet) >> 55 - Hood, Lids >> Hood >> Hood, removing, installing and adjusting (up to model year 2005) >> Buffer stop for height adjustment

Buffer stop for height adjustment

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Buffer Stop For Height Adjustment
GW00020476Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • The buffer stops can be used for adjusting the height of the hood.
scientia non olet · About LEMON Manuals