LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Body Exterior - Cabriolet) >> 55 - Hood, Lids >> Convertible top compartment cover >> Convertible top compartment cover, removing and installing >> Hinge, removing

Hinge, removing

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Bolts & Hinge
GW00020483Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • Only remove both outer bolts - 2  - to remove convertible top compartment cover or hinges.
  • Hinge base plate must not be removed.

2 - Screw (21 Nm)