Remote control motor, removing and installing (country versions)
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
- Unclip operating rod - 3 - and disengage.
- Remove bolt - 2 - (Qty. 2). Tightening torque: 2 Nm
- Remove remote control motor.
- Disconnect connector from remote control motor - 1 -.
- Installation is performed in the reverse order of removal.