Removing and installing lower part of hood lock

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing And Installing Lower Part Of Hood Lock

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disengage Bowden cable for hood → Hood lock cable, removing and installing .
Remove bolts - 2 - (4x). Tightening torque: 14 Nm
Remove lower part of lock - 1 -.
To adjust hood, move lower section of lock up or down as required.