Vehicle, lifting with suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC, 2ME

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

During the next step make sure that the wheels do not lose contact with the turntables when the vehicle is raised!

If this should happen, turntables should not be moved. This would give a false results!

Position axle lift under front jacking points and raise vehicle.

NOTE:

The vehicle is raised by 60 mm.

Fig 1: Ensuring Securing Pins Are Correctly Positioned

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Move cylinder in threaded spindles and secure with bolts.

Ensure bolts - arrows - are correctly positioned!

Lower vehicle on spacer unit V.A.G 1925.