Pressing on inner constant velocity joint

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Joint/Triple Roller Star Splines

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Before installing joint or triple roller star, splines - A - must be lightly coated with grease used in joint.

Fig 2: Pressing On Joint Until Stop

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Press on joint until stop.
Insert circlip.

NOTE:

Position ball hub with chamfer on inner diameter (splines) on driveshaft.