Pressing off outer constant velocity joint
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Secure drive shaft with protective covers in vise clamp.
- Loosen clamp and turn back protective boot.
- Drive CV joint from drive axle using a drift - A -.
Drift must be placed precisely on star of CV joint.
Driving joint on
- Drive onto shaft with plastic hammer until securing ring engages.