Coat cover or cap sealing surface with D 454 300 A2
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Apply sealant - hatched surface - to clean cover or cap surface. Sealant bead: unbroken, dia. 2 to 3 mm, skirt area around inner holes - arrow -.
- Align cover and cap to screw holes and drive or press onto joint.
- Clear away leaking sealant immediately.