LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Rear Final Drive) >> 39 Final drive, Differential >> Drive pinion and ring gear, adjusting >> Ring gear, adjusting >> The following shims are available for "S1"

The following shims are available for "S1"

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Shim thickness (mm) 1) 
0.15 0.50 0.90
0.20 0.60 1.00
0.30 0.70 1.20
0.40 0.80  

1) Using the shim tolerance variations it is possible to find the exact shim thickness required, insert two shims if necessary.

scientia non olet · About LEMON Manuals