LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (2.0L - Turbo Engine Mechanical, Engine Code(S): BPG, BWT) >> 17 - Engine - Lubrication >> Lubrication system components, removing and installing >> Balance shaft module with oil pump, removing and installing >> Bolt allocation for balance shaft housing

Bolt allocation for balance shaft housing

WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Bolt Allocation For Balance Shaft Housing
GW00017526Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - Hex collar bolt M7x40

B - Hex collar bolt M7x70

C - Hex collar bolt M7x90

D - Hex collar bolt M7x55

E - Sealing plug with O-ring

scientia non olet · About LEMON Manuals