Check ignition key withdrawal lock
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Switch ignition key to driving position ("ignition on").
- Press brake pedal and hold.
- It must be possible to shift selector lever out of position "P" without "hitching" while locking button on selector lever handle is pressed.
- Switch ignition off.
- It should not be possible to remove ignition key when selector lever is in any other position than "P".
- Place selector lever in position "P".
- It must be possible to move ignition key into removal position without "sticking".
- Remove ignition key.
- It must be possible to remove ignition key only in position "P".
- Selector lever cannot be shifted out of position "P" with locking button pressed and foot brake operated.