Illustration of transmission flange
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2009 Audi A4, 2008 Audi S4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
A: dowel sleeves for centralizing
Securing engine to transmission:
| Item | Bolt | Nm |
|---|---|---|
| 1 | M12x80 | 65 * See note |
| 8 | M10x60 | 45 |
| 9 | M10x60 | 45 |
| 10 | M10x60 | 45 |
*Also secures starter.
Securing transmission to engine:
| Item | Bolt | Nm |
|---|---|---|
| 2 | M12x105 | 65 |
| 3 | M12x110 | 65 |
| 4 | M12x105 | 65 |
| 5 | M12x105 | 65 |
| 6 | M12x130 | 65 * See note |
| 7 | M12x170 | 65 |
*Also secures a heat shield.
| Component | Nm |
|---|---|
| Engine speed (RPM) sensor G28 to transmission | 10 |
| Bracket for ATF lines to transmission | 21 |
| Bracket for exhaust pipe lug. | 23 |
| Heat shields above drive axles to transmission | 23 |
| Heat shield for driveshaft to transmission cover | 25 |
| Bracket for sound insulation to subframe | 10 |
| Support bracket to transmission | 10 |