Transmission Vehicle Speed Sensor (VSS) G38 , removing and installing: Installing

WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Transmission Vehicle Speed Sensor (VSS) And Spacer

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Install and tighten Transmission Vehicle Speed Sensor (VSS) - 2 - using spacer sleeve - 1 - (height: 8 mm) to 6 Nm.

Fig 2: Transmission Vehicle Speed Sensor -G38- Connector

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Connect connector at Transmission Vehicle Speed Sensor (VSS) G38.
Installing oil pan.
Fill up ATF → ATF, changing or topping off after repairs .