Speedometer Vehicle Speed Sensor (VSS) G22 , removing and installing: Installing

WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Speedometer Vehicle Speed Sensor -G22- And Vehicle Speed Sensor -G68-

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Replace sealing rings (arrows).
Insert O-rings with gear oil.
Insert sensor.
Engage retaining bracket at mounting bracket for flange shaft.

Fig 2: Axle Shaft Shielding Plate

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Install heat shield - 1 - for left drive axle (arrows), if present.

Third bolt is not visible in the illustration.