Inner race/needle bearing - arrow A - for 6th gear selector gear, pressing on

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2007 Audi S4, 2007 Audi RS 4, and 2006 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inner Race/Needle Bearing For 6th Gear Selector Gear, Pressing On

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 2: Removing 6th Gear Selector Gear Together With Needle Bearing And Synchronizer Rings

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove 6th gear selector gear - A - together with needle bearing and synchronizer rings.
Place 3rd and 6th gear selector gears thrust washer - B - on 6th gear selector gear.