Pressing off inner race/tapered roller bearing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2007 Audi S4, 2007 Audi RS 4, and 2006 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pressing Off Inner Race/Tapered Roller Bearing

GW00019295

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove circlip and washer before pressing off.
Attach grip V.A.G 1582/7 and clamp behind bearing rollers.
Then carefully press inner race/tapered roller bearing out.
Remove shim " S ₅ " from drive pinion.

NOTE:

You can also press the inner race/tapered roller bearing out together with the double angular contact ball bearing Double angular contact ball bearing, pressing off