Torsen housing, installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2007 Audi S4, 2007 Audi RS 4, and 2006 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Coat new O-ring with transmission fluid and insert in surrounding groove in transmission cover.
- Place torsen housing on transmission cover.
- Tighten bolt - arrow - to 24 Nm.
- Top off transmission fluid and check transmission fluid level in manual transmission → 34 CONTROLS, HOUSING .