LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (6-Speed Manual Transmission 0A3 All Wheel Drive, Internal Component Servicing) >> 34 - Controls, housing >> Transmission, disassembling and assembling >> Input shaft, hollow shaft, drive pinion and selector rods, removing and installing - assembly overview >> Removing seal for input shaft

Removing seal for input shaft

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2007 Audi S4, 2007 Audi RS 4, and 2006 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Seal For Input Shaft
GW00019205Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - Jaw protectors

NOTE:
  • You can also remove the sealing ring with the puller hook T20143.
scientia non olet · About LEMON Manuals