Over-center spring, removing and installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2007 Audi S4, 2007 Audi RS 4, and 2006 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installation Clamp T40025 Installed On Over-Center Spring

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove storage compartment on drivers side →
- 68 - INTERIOR EQUIPMENT
- 68 - INTERIOR EQUIPMENT for Cabriolet
.
Tension over-center spring with clutch pedal, at the same time pressing on assembly clamp T40025.
Move clutch pedal to rest position and take out over-center spring together with assembly clamp T40025 downwards.