LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (6-Speed Manual Transmission 02X, Four-Wheel Drive) >> 35 Gears, shafts >> Pinion shaft and hollow shaft >> Pinion shaft and hollow shaft, disassembling and assembling >> Disassembling and assembling hollow shaft >> Pressing off tapered roller bearing inner race with 2nd speed selector gear

Pressing off tapered roller bearing inner race with 2nd speed selector gear

WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressing Off Tapered Roller Bearing Inner Race With 2Nd Speed Selector Gear
GW00019049Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - Splitter 22 to 115 mm, e.g. Kukko 17/2

NOTE:
  • When pressing off, make sure that only the gear teeth of the selector gear and not the gear shift splines contact the splitter - A  -. Otherwise the gear shift splines will be damaged.
scientia non olet · About LEMON Manuals